HRTE About
Here Enterprises, Inc is a developer of wind power, our nation's fastest growing renewable energy resource. The Company is engaged in planning, developing, acquiring and operating wind farms in the United States to generate clean, profitable wind energy. Here Enterprises is developing wind energy projects which co-locate wind farms with commercial businesses in order to maximize cashflow for each project.
Here Enterprises has acquired its first development project. Cycle Ranch is located in Floresville, Texas, the state now leading the nation in wind power production. The Company is developing a wind farm on property that hosts an established motocross speedway drawing thousands of fans, spectators and competitors each week.
HRTE Security Details
Here Enterprises,Inc publicly traded on the OTC Market under the symbol, “HRTE”, and within the PK limited market tier.
Visit http://www.otcmarkets.com/stock/HRTE/quote for more information.
HRTE Products & Services
Exclusive to TALON Wind Turbines from A&C Green Energy.
What is Variable Pitch Technology?
This is an advanced technology that, up until NOW, was only available on those huge megawatt systems you might find in major wind farms. Easily stated, this system enables the wind turbine to maintain a constant peak output during times of higher wind.
How does Variable Pitch Technology work?
Each of the Talon's 3 blades have an attached centrifugal hammer that calculates when the generator is turning too quickly. Each blade is then automatically pitched to control the generator rotation speed.
Why is Variable Pitch Technology important?
When another wind turbine reaches its peak power (usually in high wind speeds around 25-30 mph), there is a decline in the power output curve mostly because of either blade design or tail furling. Instead of a decline in power output with increasing wind speeds, the Talon series maintains its maximum power output up to winds of 56 mph, its top working speed.
What does all this mean?
With the increased power output from the Talon wind turbine, you will have more energy to use and more energy bill savings, which means you can afford to leave your new HDTV on all month long!
Different Wind Turbine Types:
Vertical Axis Wind Turbines (VAWT)
These turbines spin around like a record and have their axis running up and down. These systems are good in urban areas where there is a limited amount of space. The drawback to these systems is that the oncoming wind pushes on both sides of the blades, creating an issue of excess drag and decreased performance.
Horizontal Axis Wind Turbines (HAWT)
Like most wind turbines and windmills. This design has been relatively untouched for centuries. Whether considering the windmills of Holland or the old windmills on the prairies of West Texas, these systems have been the most productive of all. There are essentially two types of HAWT: Upwind and Downwind.
Upwind HAWT
Upwind systems are the most common of the "small wind" market, which is reserved for generators that range in output power of up to 50kW. To face into the wind, these systems incorporate a tail vain, which in many cases, as in our PowerMax+ 20K and PowerMax+ 25K units, automatically adjusts to the angle of the wind to limit overspeed rotation.
Downwind HAWT
Facing away from the wind and without a tail, these systems are usually what appear in large-wind megawatt wind farms.
Practical Explanation:
Simply put, tail-furling and upwind systems lose power during high winds. This decrease in productivity is caused when the blades spin so fast that the oncoming wind meets a "wall of blades" and cannot pass through the blades to create the drag necessary to rotate the shaft with any efficiency. The result is a dramatic reduction on the power curve after the upwind system reaches its peak power. Mimicking the pitching blades of the megawatt turbines, the Talon series from A&C Green Energy reaches its peak power quickly and then maintains the peak output up to 56 mph. In the graph below, the Talon is represented by the BLUE curve, while the RED curve is from a typical upwind system of the "same" rated output. Because of Variable Pitch Technology, the Talon produces higher wattage output at any given wind, reaches its peak power in lower wind and is able to sustain that peak output in higher winds. This increased wattage output means higher energy production. Higher energy production means more energy savings and more money for you. The longer your Talon is in service, the more money you will earn over a similar upwind system.
Technical Explanation:
Quote:
When the wind speed is below 7 mph (3m/s), the turbine blade angle remains static and the angle (X1) formed between the blade and turbine plane is B° (X1=B°). This is the ideal angle for the blades to begin their rotation. As long as the wind speed reaches 7 mph, the blades will begin to rotate.
While rotating, the outermost edge of the blade will be driven by the centrifugal force generated by the rotation of the blade to tilt toward the turbine plane. As the wind speed increases, the blade angle (X1) will then decrease to 0° so that the blade is parallel with the turbine plane. At this angle, the turbine has nearly reached its rated output power.
When the wind speed is between 20 mph - 55 mph (9m/s - 25m/s), the blade angle (X1) will stay near 0° with slight fluctuations in order to maintain it’s rated power.
When the wind speed is between 55 mph - 112 mph (25m/s - 50m/s), the wind will draw the blade by the centrifugal force, so the angle (X1) will continue to decrease to a negative angle (X1 = -B°) [B° and -B° are not the same]. Under this negative angle, the blade angle will produce a resistance on the rotation of turbine blades to slow down the turbine, thus protecting it from over speed operation. The maximum rotation of the turbine will be no more than 380 RPM.
About Wind Here: Winning with Wind
Wind Here believes that harmony exists in nature everywhere and a dual usage of the land is symbiotic and brings multiple benefits to the community that are compounded beyond the energy solutions of the wind farms alone.
Wind Here plans are in place to introduce economic development stimulus concepts in wind farms and wind parks that will increase rural economies with local job creation and investment opportunities with multiple revenue streams:
Quote:
Eco parks: Nature Trails, Camping, Sports and Recreation
Wind Plex: Racing Parks, Amusement Parks, Water Parks, Restaurants, Hospitality, Golf Course, Museum, Shops
Wind Farms: Rural and Remote areas where dual usage is prohibitive beyond grazing livestock or agricultural activities
Windustrial Parks: Industrial and Commercial Green Zones powered by wind turbines
Wind Here Wind Farms and Wind Parks are professionally surveyed and site tested prior to installing appropriate wind turbine technology. Wind Here is currently conducting site suitability tests with three Talon 2 wind turbines manufactured by A & C Green Energy. http://www.acgreenenergy.com
Wind Here erects a group of wind turbines in the same location used for production of electric power. Individual turbines are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network. At a substation, this medium-voltage electrical current is increased in voltage with a transformer for connection to the high voltage transmission system.
A large wind farm may consist of a few dozen to several hundred individual wind turbines, and cover an extended area of hundreds of square miles, but the land between the turbines may be used for agricultural or other purposes. A wind farm may be located on-shore to harvest the inland thermals on hilly slopes and valleys and open plains or off-shore to take advantage of strong winds blowing over the surface of an ocean or lake.
HRTE Management Team
Mark K. Ryun President / CEO
Mark Ryun was appointed as president secretary, treasurer and director of Here Enterprises, Inc. (HRTE) on March 4, 2010. Since July of 1991, Mr. Mark K. Ryun has been the president and chief executive officer of the Coastal Wood Floors, a full-service hardwood flooring contracting company based in Haleiwa, Hawaii. Over the past 18 years, Mr. Ryun has been a member of the board of directors with the Honolulu Board of Contractors in the State of Hawaii, the National Wood Flooring Association (NWFA), and the Better Business Bureau of Hawaii (BBB). Since June of 1992, Mr Ryun raced professional motocross for Pflueger Honda, Montgomery Motors, No Fear and Oakley. He competed in Motocross events for ten years.
In 2000, Mr. Ryun built motocross tracks for Hawaii Motorsports Association, finishing all phases from financially funding the build, designing the course and directing the crew until it was completed. As a leader, Mr. Ryun has demonstrated high standards of integrity in his business operations through personal commitment and a “hands on” involvement in every aspect of the business. Mr. Ryun maintains the corporate vision on a day-to-day basis through a tireless commitment to solid communication at all levels.
George Russell / CFO
George Russell was appointed as Chief Financial Officer of Here Enterprises Inc. (HRTE) on May 6th, 2011. Since 1996, Mr. Russell has acted as investment adviser, financial planner, and retirement consultant for affluent clients, small businesses, and medium capitalization companies. He was presented the Blue Chip Award five consecutive years for excellence in client services. He was certified and performed as a Portfolio Manager of individual equities. In 2006, Mr. Russell was named Managing Director and Controller of a new construction/ remodeling conglomerate operating throughout the state of Texas.
Mr. Russell earned an Executive MBA in Management and Strategy and holds a Bachelor’s degree in Business Administration. He proudly served in the United States Army, and is a highly decorated, combat veteran of Operation Desert Storm.
HRTE Contact Info
Here Enterprises, Inc.
848 North Rainbow Boulevard
Suite 2952
Las Vegas, NV 89107
Phone: 210-957-7879
Website: http://www.windhere.com
Investor Relations
investors@hereenterprises.com
